Updated 17/9/09

Serif - WEBPLUS X2

WIXEY ANGLE GAUGE/METER (original article May 2006)

There is not much to do with this unit when it arrives – just remove the battery cover, insert the battery and switch on.

The operation of the gauge is very easy. I did find that my gauge when checking my blade in the table saw was wrong by 0.1°.

This is within the tolerance of the gauge. I undertake more testing over the next few weeks and post the results. You should note that you ARE NOT limited to using this only on metal surfaces. With care you can use it on aluminium or wood – it just does not “stick” to the surface.

In summary a wonderful little tool, which will be very useful inside and outside the shop. Excellent value for your buck!

Update October 2008

I have been using the angle gauge for 18 months now and I find invaluable tool - The first battery has just been replaced (I use it daily) - I have set-up numerous tools (including my Logosol M7) , I have even used it for minor building projects on the house.

The only things to watch out for are:

The magnetic base is not too strong, I store mine on the side of the table saw and some times it falls off.
The accuracy is ± 0.1°, which is ok for most work (95%), but for really accurate settings I still use my tried and trusted bevel gauge.